THE JO WAY / Request a Quote · Let’s plan your installation
JO-WEIGH + LIONLOAD / CONNECTIONS

Scale connectivity.
Supported stream formats.

Bring live weight data into your workflow through supported serial and Ethernet output formats. We help you match the connection to your setup.

Request a compatibility review ↗
01

RS-232 serial

Receive a supported indicator stream through a Windows COM port. Match cabling, baud rate and output settings. Zero and tare remain on the indicator.

02

Ethernet TCP

Receive a supported stream from the configured IP address and port. The indicator’s actual output format must match the selected software profile.

03

USB / local Wi-Fi base

A separate base connection for Jo-Weigh bench applications. LionLoad uses supported serial or Ethernet indicators for live truck weighing.

SUPPORTED STREAM FORMATS

A clear path from scale to software.

Connect through a supported data format. Guided format detection can suggest matching profiles from a supported live stream. Your installer selects the configured format and verifies the reading before capture.

Fixed-length continuous ASCII

Fixed13 and selected 8-character weight frames

Weight, polarity, units, gross/net and live status are checked at defined positions.

Delimited status and weight

Comma-separated ASCII

Selected formats carry stable, moving or error status together with the weight and units.

Weight with a status block

CR / LF / ETX framing

The complete weight and status message must arrive before the reading can be used.

Continuous weight and motion codes

CR / LF / EOT framing

Supported fixed-width output carries weight, units and gross/net codes whose case indicates motion.

Configurable ASCII

CR, LF or ETX termination

Match the complete message, field positions and status codes to a supported output sample.

Available profiles depend on the software version supplied. Confirm the complete output format, units, decimal precision, motion and error status on the installed equipment. A connection type alone does not establish compatibility.

THREE STEPS TO A GOOD FIT

Bring the details.
We’ll check the match.

  1. Identify the equipment. Record the exact model, firmware and installed connection option.
  2. Share the output. Supply the selected format and sample readings with units and status.
  3. Verify on your equipment. Compare live weights, motion, overload, disconnects and reconnects; print a real ticket.

Software connectivity does not provide legal-for-trade certification. Your scale professional must confirm the complete installation for its intended use.